Saturday, January 21, 2012

How to Jailbreak Your iPad 2 Using Absinthe Windows 5.0.1

6 comments:
These are instructions on how to perform an untethered jailbreak of your iPad 2 running iOS 5.0.1 using Absinthe for Windows.

Warning***: Before you continue make sure to do a backup of your device in iTunes as you may lose your Camera Roll during this process.

Step One
Download the latest version of Absinthe from here.

Step Two
Double click to extract the downloaded archive and launch the Absinthe application.


Step Three
As prompted, connect your iPad 2 to the computer via USB. Make sure to remove any passcodes or VPN settings you've previously set.


Step Four
Click the Jailbreak button to begin


Step Five
The application will take you through several steps of the jailbreak: Sending initial data, waiting for reboot, waiting for device to finish booting, Preparing jailbreak data, and Sending payload data.






Step Six
You will be informed that the jailbreak is 'Almost done'. 


Step Seven
On you device, locate the Absinthe icon and press it to complete your jailbreak. It could be on any homescreen.


If the server is down and you get an Error establishing a database connection message then tap the Settings icon on your springboard and turn on VPN


You will get a configuration error; however, after about a minute your device will reboot.


Once your device restarts you will be jailbroken with Cydia on the Springboard!



*thanks iclarified*

 Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com And like our Facebook page www.iPodSets.com - Posted using my iPhone 4

How to Jailbreak Your iPhone 4S Using Absinthe Windows 5.0, 5.0.1

No comments:

These are instructions on how to perform an untethered jailbreak of your iPhone 4S using Absinthe for Windows.

Warning***: Before you continue make sure to do a backup of your device in iTunes as you may lose your Camera Roll during this process.


Step One
Download the latest version of Absinthe from here.

Step Two
Double click to extract the downloaded archive and launch the Absinthe application.


Step Three
As prompted, connect your iPhone 4S to the computer via USB. Make sure to remove any passcodes or VPN settings you've previously set.


Step Four
Click the Jailbreak button to begin


Step Five
The application will take you through several steps of the jailbreak: Sending initial data, waiting for reboot, waiting for device to finish booting, Preparing jailbreak data, and Sending payload data.






Step Six
You will be informed that the jailbreak is 'Almost done'.


Step Seven
On your device, locate the Absinthe icon and press it to complete your jailbreak. It could be on any homescreen.


If the server is down and you get an Error establishing a database connection message then tap the Settings icon on your springboard and turn on VPN.


You will get a configuration error; however, after about a minute your device will reboot with Cydia on the Springboard!


Reboot iDevice to bring mail icon back if it goes white***

*thanks iclarified*

 Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com And like our Facebook page www.iPodSets.com - Posted using my iPhone 4

Windows Command Line Utility to Jailbreak iPhone 4S and iPad 2 is Released

No comments:

The iPhone Dev-Team has released an updated command line utility that can perform a jailbreak of the iPhone 4S and iPad 2 using Windows.

Version 0.4.3 adds support for Windows users. It also makes the "-j" jailbreak option much more functional :) See the README.txt for usage.

The command line interface should only be run by advanced users and is primarily for debugging issues with the jailbreak. Most users should wait for the Chronic Dev-Team to release a Windows version of Absinthe.

If you want to give the CLI a go, you can download it here. Make sure to read the included readme.txt for usage instructions.


cinject -i payloads/jailbreak.mobileconfig
cinject -j payloads
cinject -w
toggle VPN on and look for the "pod2g is in da house!" syslog message


To be notified when Absinthe for Windows is available you can follow us on TwitterFacebookRSS, or check out the All Jailbreak tutorials page.

Read More








*thanks iclarified*


 Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com And like our Facebook page www.iPodSets.com - Posted using my iPhone 4

How to Jailbreak Your iPad 2 Using Absinthe Mac 5.0.1

No comments:

These are instructions on how to perform an untethered jailbreak of your iPad 2 running iOS 5.0.1 using Absinthe for Mac.

Warning***: Before you continue make sure to do a backup of your device in iTunes as you may lose your Camera Roll during this process.



Step One
Download the latest version of Absinthe from here.

Step Two
Double click to extract the downloaded archive and launch the Absinthe application.


Step Three
As prompted, connect your iPad 2 to the computer via USB. Make sure to remove any passcodes or VPN settings you've previously set.


Step Four
Click the Jailbreak button to begin


Step Five
The application will take you through several steps of the jailbreak: Sending initial data, waiting for reboot, waiting for device to finish booting, Preparing jailbreak data, and Sending payload data.






Step Six
You will be informed that the jailbreak is 'Almost done'.


Step Seven
On you device, locate the Absinthe icon and press it to complete your jailbreak. It could be on any homescreen.


If the server is down and you get an Error establishing a database connection message then tap the Settings icon on your springboard and turn on VPN.


You will get a configuration error; however, after about a minute your device will reboot with Cydia on the Springboard!


*If you are still unable to succeed please be patient as the dev team's servers are being hammered!




*thanks iclarified*

 Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com And like our Facebook page www.iPodSets.com - Posted using my iPhone 4

How to Jailbreak Your iPhone 4S Using Absinthe Mac 5.0, 5.0.1

2 comments:

These are instructions on how to perform an untethered jailbreak of your iPhone 4S using Absinthe for Mac.

Warning***: Before you continue make sure to do a backup of your device in iTunes as you may lose your Camera Roll during this process.


Step One
Download the latest version of Absinthe from here.

Step Two
Double click to extract the downloaded archive and launch the Absinthe application.


Step Three
As prompted, connect your iPhone 4S to the computer via USB. Make sure to remove any passcodes or VPN settings you've previously set.


Step Four
Click the Jailbreak button to begin


Step Five
The application will take you through several steps of the jailbreak: Sending initial data, waiting for reboot, waiting for device to finish booting, Preparing jailbreak data, and Sending payload data.






Step Six
You will be informed that the jailbreak is 'Almost done'.


Step Seven
On your device, locate the Absinthe icon and press it to complete your jailbreak. It could be on any homescreen.


If the server is down and you get an Error establishing a database connection message then tap the Settings icon on your springboard and turn on VPN.




You will get a configuration error; however, after about a minute your device will reboot with Cydia on the Springboard!




*thanks iclarified*

 Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com And like our Facebook page www.iPodSets.com - Posted using my iPhone 4