Wednesday, December 28, 2011

Updated2 How to Perform an Untethered Jailbreak of Your iPhone 4, iPod touch, iPad1 on Mac 5.0.1

2 comments:


These are instructions on how to perform an untethered jailbreak of your iPhone 4 on 5.0.1 using RedSn0w for Mac. The Windows version of this tutorial here.

This procedure will cause you to upgrade your baseband potentially ruining your chances for an unlock. Please follow a tutorial on how to update to iOS 5.0.1 using a custom ipsw if you need an unlock.

If you want to jailbreak a lower firmware version you can find the appropriate tutorial here.

Step One
Create a folder on your desktop called Pwnage

New RedS0w 9.10b3 is out with more fixes rerun jailbreak... download from our RedSn0w Download page..

Download the latest RedSn0w from here and place it in the Pwnage folder. Likewise, download the 5.0.1 firmware for your iDevice from here and place it in the Pwnage folder. (Note: you do not need to download the 5.0.1 firmware if you are already on iOS 5.0.1)

Extract the RedSn0w zip file by double clicking it.

Step Two: (You can skip this step if iOS 5.0.1 is already installed on your device)
Connect your iPhone to the computer and launch iTunes.

Select your iPhone from the list of devices on the left. Now hold down Option and click the Restorebutton. Restore is preferred as it won't create any wasted space on your iPhone.

Navigate to the Pwnage folder on your desktop and select the 5.0.1 firmware ipsw. Click the Choosebutton to continue.

iTunes will now update your iPhone to the new firmware.

Step Three
Launch the redsn0w application from the redsn0w folder we extracted earlier.

Step Four
Once RedSn0w opens click the Jailbreak button

Step Five
Plug your iPhone into the computer and make sure its OFF then click the Next button

Step Six
RedSn0w will now guide you through the steps to get into DFU mode. You can find more help with DFU mode here

Hold down both the Home button and the Power button for 10 seconds.

Release the Power button and continue holding the Home button until RedSn0w detects the device.

Step Seven
Your iPhone will now reboot

Step Eight
RedSn0w will now prepare the jailbreak data.

Step Nine
Select Cydia from the list of options and click Next.

Step Ten
Your iPhone will now be rebooted again and RedSn0w will begin uploading the new RAM Disk and Kernel.

Step Eleven
Once this is complete you will be notified that RedSn0w is done. When your iPhone finishes rebooting (5 minutes or so) it will be jailbroken with Cydia on the SpringBoard.


*As usual a big thanks to the iPhone Dev-Team, pod2g, and Geohot for their hard work and contribution to the iPhone community.



*thanks 9to5mac*

 Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com And like our Facebook page www.iPodSets.com - Posted using my iPhone 4

How to Jailbreak Your iPhone Without Updating the Baseband Mac 5.0.1

No comments:


These are instructions on how to jailbreak your iPhone 3GS or iPhone 4 on iOS 5.0.1 without updating the baseband using RedSn0w for Mac. You may want to do this to preserve an unlock from a lower baseband version.

Please note this jailbreak is tethered for every device but the old bootrom iPhone 3GS which means you will need to connect your device to the computer each time you reboot. Also, it may be prudent to save your SHSH Blobs by following this tutorial before continuing if you haven't already.

If you want to jailbreak a lower firmware version you can find the appropriate tutorial here.


Step One
Create a folder on your desktop called Pwnage

Download RedSn0w 0.9.9b9d or higher from here and place it in the Pwnage folder. Likewise, download the 5.0.1 firmware from here and place it in the Pwnage folder.

Extract the RedSn0w zip file by double clicking it.


Step Two
Launch the redsn0w application from the redsn0w folder we just extracted.


Step Three
Click to select Extras from the main menu.


Step Four
Click to select Custom IPSW from the Extras menu.


Step Five
Navigate to the Pwnage folder on your desktop and select the IPSW we downloaded then clickOpen.


If you are using the iPhone 3GS you may be asked to identify whether you are on a newer or older model.


Step Six
RedSn0w will now begin building a custom IPSW for you.




Step Seven
You'll be notified once RedSn0w has completed building your IPSW. Click the OK button.


Step Eight
Click the Pwned DFU button from the Extras menu.


Step Nine
Plug your iPhone into the computer and make sure its OFF then click the Next button


Step Ten
RedSn0w will now guide you through the steps to get into DFU mode. You can find more help with DFU mode here


Hold down both the Home button and the Power button for 10 seconds.


Release the Power button and continue holding the Home button until RedSn0w detects the device.


Step Eleven
RedSn0w will run the LimeRa1n exploit.


Step Twelve
You'll then be notified that your iPhone is in Pwned DFU mode.


Step Thirteen
Launch iTunes by clicking its icon in your dock.


Step Fourteen
Select your device from the list on the left then under the Summary tab hold down the Option key and click the Restore button.


Step Fifteen
You will then be asked to select your IPSW for restore. Navigate to the Pwnage folder on your desktop and select the IPSW that begins with NO_BB then click the Open button.


Step Sixteen
iTunes will now restore and jailbreak your device using the Custom IPSW.



JAILBREAK AND INSTALL CYDIA
Follow these instructions to jailbreak your device on the new iOS 5.0.1 firmware.
iPhone 4
iPhone 3GS

BOOT TETHERED
Once you have jailbroken you will need to rerun redsn0w to boot tethered.

Step One
From the main RedSn0w menu click the Extras button.


Step Two
Select Just boot from the Extras menu to just boot tethered.



UNLOCK:
If you have a supported baseband you can now install UltraSn0w to unlock your device. Instructions are here.


*As usual a big thanks to the iPhone Dev-Team and Geohot for their hard work and contribution to the iPhone community.

*thanks iclarified*

 Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com And like our Facebook page www.iPodSets.com - Posted using my iPhone 4